The UNO SCOUT is a single-board microcontroller that is compatible with the Arduino IDE and pin-compatible with the UNO R3 shields and boards. It comes fully assembled with headers. The UNO SCOUT board is based on ATmega328P microcontroller running at 16MHz with 32KB of flash and 2KB of RAM. This board version might require a driver install on your system. Download these drivers from the UNO Scout resource page.
This is not your average prototyping board! The UNO Scout aims to raise the bar on what is capable with standard microcontrollers by providing you with full access to all the funtions of the micro controller in an easy to use environment with an aesthetic appeal to tie it together.
UNO Scout
ATmega328 microcontroller with Optiboot (UNO) Bootloader
CH340C Serial-USB Converter
AP2112 Voltage Regulator
A4/A5 Jumpers
Chassis/Digital Ground Jumper
3.3V to 5V Voltage Level Jumper
Input voltage - 7-15V
1 I2C SH 1.0MM Connector (Compatible with other systems)
20 Digital I/O Pins (6 PWM Outputs and 6 Analog Inputs )
Access to A6/A7 pins (+2 Analog Inputs)
ISP Header
32k Flash Memory
16MHz Clock Speed
R3 Shield Compatible