Description
The UNO SCOUT is a single-board microcontroller that is compatible with the Arduino IDE and pin-compatible with the UNO R3 shields and boards. It comes fully assembled with headers. The UNO SCOUT board is based on ATmega328P microcontroller running at 16MHz with 32KB of flash and 2KB of RAM. This board version might require a driver install on your system. Below under the drivers tab you can download and install these drivers.
​
Technical Details
-
ATmega328 microcontroller with Optiboot (UNO) Bootloader
-
CH340C Serial-USB Converter
-
AP2112 Voltage Regulator
-
A4/A5 Jumpers
-
Chassis/Digital Ground Jumper
-
3.3V to 5V Voltage Level Jumper
-
Input voltage - 7-15V
-
1 I2C SH 1.0MM Connector (Compatible with other systems)
-
20 Digital I/O Pins (6 PWM Outputs and 6 Analog Inputs )
-
Access to A6/A7 pins (+2 Analog Inputs)
-
ISP Header
-
32k Flash Memory
-
16MHz Clock Speed
-
R3 Shield Compatible
​
Drivers
Schematic